![]() Strongly characterized by their Great Durability and amazing Prices, making them quite affordable for an average person. On bicycles with three front sprockets, you may wish to keep the chain on the middle front sprocket (F) and shift the chain on the rear sprocket cluster.These are a special series of bikes manufactured by the Huffy Company founded in the year 1892. Repeat these steps until the brake shoes are 116 inch from the rim and the Brake Lever (G) does not go all the way to the grip when squeezed (.īackpedaling and shifting while not pedaling can damage the sprockets and stretch the cable wire.įor the best performance in this case, do not use the largest rear sprocket (E). Over tightening the cable clamp may cut the cable and cause injury to the rider or to others. If desired, adjust Brake Levers (G) to a comfortable distance from the grip using the Adjustment Screw (H). Over tightening the cable clamp Screw may cut the cable and cause injury to the rider or to others. Pull the Cable (D) tight and tighten the Screw. Step 1: Put the brake shoes (B) in the correct position ( g 13): 1. Position REAR Re ector (10) so it points straight backward (. Position FRONT Re ector (7) so it points straight forward ( g 10). Tighten it in a counterclockwise direction (anti-clockwise). You must use strong force to move the quick release lever to the close position. If the handlebar and stem turn without turning the front wheel, realign the stem with the wheel and tighten the stem bolt(s) tighter than before (about 12 revolu- tion only at a time).ĭo not use a ham- mer or any other tool to tighten the quick release lever. Make sure the Brake Cable Guide (B) is seated securely in the Guide Bracket (C) cutout. Insert the Brake Cable Guide (B) into the cutout in the Guide Bracket (C). Lift out the Brake Cable Guide (B) from the Guide Bracket (C). Threadless Style Stem: Note: This procedure applies to both the two-bolt Stem and four-bolt Stem ( gs 01b and 01c): 1. NOTE: Bike will have one of two styles of Stems: Quill and Threadless. If the bicycle has any parts that are not described in this manual, look for sepa- rate Special Instructions. The Serial Number (1) can be found on the bottom of the crank housing as shown. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |